OSP-100

Need some help with planning, execution, experiences or want to tell a witty anecdote or give some small business advice to our noobies for their ideas?
Salem
Posts: 3
Joined: Sun Sep 20, 2015 2:50 am
Location: rarotonga

OSP-100

Postby Salem » Sat Oct 24, 2015 1:25 am

I have just replaced the 24 volt power supply board as a result of the disalarm light having been turned on with the monitor not working. The monitor comes on for a minute once in while before going back off. Does any one have any suggestions please?

Pendragon
Posts: 6
Joined: Thu Oct 08, 2015 7:56 pm
Location: miquelon

Re: OSP-100

Postby Pendragon » Fri Oct 30, 2015 4:51 am

Hi Salem, try performing the reset process, that is if you have the manual.

Ramses
Posts: 5
Joined: Wed Aug 12, 2015 9:35 pm
Location: Atikokan

Re: OSP-100

Postby Ramses » Fri Oct 30, 2015 4:53 am

What type of OSP-100 are you using?

Salem
Posts: 3
Joined: Sun Sep 20, 2015 2:50 am
Location: rarotonga

Re: OSP-100

Postby Salem » Fri Oct 30, 2015 5:21 am

I am using the Okuma Captain L370M-P100. I do not have the manual either.

Pendragon
Posts: 6
Joined: Thu Oct 08, 2015 7:56 pm
Location: miquelon

Re: OSP-100

Postby Pendragon » Fri Oct 30, 2015 5:33 am

Go to http://www.shamrockmachinery.com/manual ... folder.htm
This is where you can get the manual.

Salem
Posts: 3
Joined: Sun Sep 20, 2015 2:50 am
Location: rarotonga

Re: OSP-100

Postby Salem » Fri Oct 30, 2015 5:43 am

Thanks a lot Mr. Pendragon. I checked the manual and i have finished the reset process but there is no improvement..

Chris
Posts: 5
Joined: Sat Sep 12, 2015 4:41 am
Location: aruba

Re: OSP-100

Postby Chris » Fri Oct 30, 2015 5:57 am

Perhaps you didn't do the replacement in the right manner.check it again and if you are not confident that you can do it look for help from somebody who knows how to play with the connections


Return to “Advice and practical applications”

Who is online

Users browsing this forum: No registered users and 1 guest



  •  The team

  •  Search
  • Advanced search


  •  Top Posters

  •  Newest members

  •  Who is online?
  • In total there is 1 user online :: 0 registered, 0 hidden and 1 guest

    Users browsing this forum: No registered users and 1 guest



 

 

cron