Help Make a Cribbage Board

Here you can talk about anything you want that doesn't fall under any other heading
User avatar
MicusVixxen
Posts: 15
Joined: Tue Mar 03, 2015 8:03 am

Help Make a Cribbage Board

Postby MicusVixxen » Sun May 08, 2016 9:20 am

A friend of mine has asked me to make a cribbage board for her. I am planning to use either a CNC route or an edge acrylic to laser it out. However, I have got a problem that I haven’t been able to get past. What measurements should I use for the spacing, holes, and sizes?

User avatar
MicusVixxen
Posts: 15
Joined: Tue Mar 03, 2015 8:03 am

Re: Help Make a Cribbage Board

Postby MicusVixxen » Thu May 12, 2016 6:02 am

Any help here guys? Or at least is there anyone here with a dxf file? Willing to machine one for your later.

josiahN
Posts: 6
Joined: Sun Aug 09, 2015 10:23 pm
Location: Paramaribo

Re: Help Make a Cribbage Board

Postby josiahN » Thu May 12, 2016 7:12 am

Hi, have you got one already? If you haven’t, I can draw up one for you.

User avatar
MicusVixxen
Posts: 15
Joined: Tue Mar 03, 2015 8:03 am

Re: Help Make a Cribbage Board

Postby MicusVixxen » Fri May 13, 2016 6:29 am

Ola! I am looking for something like this. Do I really need anything to do with the pegs?
Attachments
Cribbage board.JPG

Bassett
Posts: 3
Joined: Thu Mar 03, 2016 10:21 pm
Location: juneau

Re: Help Make a Cribbage Board

Postby Bassett » Sat May 14, 2016 12:59 pm

Hello Vixxen, knowing the diameter needed for the pegs is a must. However, if you only want the markings of the hole-centres, then there is no need.

User avatar
MicusVixxen
Posts: 15
Joined: Tue Mar 03, 2015 8:03 am

Re: Help Make a Cribbage Board

Postby MicusVixxen » Sat May 14, 2016 1:01 pm

Bassett wrote:Hello Vixxen, knowing the diameter needed for the pegs is a must. However, if you only want the markings of the hole-centres, then there is no need.
I just need the hole centre markings.

Armyan
Posts: 3
Joined: Fri Apr 22, 2016 2:17 pm
Location: gaza

Re: Help Make a Cribbage Board

Postby Armyan » Sat May 14, 2016 1:02 pm

Why don’t you attach a picture of the board showing the approximate measurements? That would be helpful.

User avatar
MicusVixxen
Posts: 15
Joined: Tue Mar 03, 2015 8:03 am

Re: Help Make a Cribbage Board

Postby MicusVixxen » Sat May 14, 2016 1:03 pm

Armyan wrote:Why don’t you attach a picture of the board showing the approximate measurements? That would be helpful.
I am afraid I am looking for the dimensions myself. Was hoping to get help from you guys.

Miles
Posts: 5
Joined: Tue Oct 06, 2015 4:39 pm
Location: monaco

Re: Help Make a Cribbage Board

Postby Miles » Sat May 14, 2016 1:07 pm

Hi Vixxen, I got this instructable as I went by googling some CNC stuff. I hope it will help you. Am not sure if it is complete though.


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest



  •  The team

  •  Search
  • Advanced search


  •  Top Posters

  •  Newest members

  •  Who is online?
  • In total there is 1 user online :: 0 registered, 0 hidden and 1 guest

    Users browsing this forum: No registered users and 1 guest



 

 

cron