Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Small hobby routers and mills like the Badog, Artisan, CNC-shop, isel, k2, charly robot advice and experiences
User avatar
_Twain_
Site Admin
Posts: 76
Joined: Sat Feb 21, 2015 5:40 pm

Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby _Twain_ » Mon Apr 27, 2015 1:16 pm

This is a thread for the miniature Badog Laser CNC Cutter. It is open for all to contribute and/or enquire. I will be providing a summary for the same.

User avatar
shaPeoko
Posts: 30
Joined: Sat Feb 21, 2015 6:02 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby shaPeoko » Sat May 02, 2015 4:04 pm

How small is it? What exactly do you mean by "miniature?"

User avatar
_Twain_
Site Admin
Posts: 76
Joined: Sat Feb 21, 2015 5:40 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby _Twain_ » Mon May 25, 2015 10:10 am

Aaah sorry, it is not as small as I made it sound. Here are the specs:
Measurements:
It measures 20 cm by 24 cm (the working area)
Power Supply:
The laser cutter requires you to rig up around 40W of power. The range for the engraving speed is 1mm to 3000mm per minute. The cutting speed is from 1mm up to 300 mm per minute.
Modus Operandi:
It uses a carbon IV oxide sealed glass laser tube.
The operating temperature is between 5 and 40 degrees (Celsius), while the operating humidity ranges between 5 and 95 percent.
The Cut:
The repeating location is accurate, give or take 1mm.
The resolution ratio is extremely precise, at 0.025 mm.
The minimum shaping characters for lasers is 1mm x 1mm
Graphic Formats Supported:
BMP and PLT formats.
How does it cool? It uses a water cooling system (and protection).
Weight: ~40 kgs. (Actually 38 kg gross)

User avatar
indolentpotato
Posts: 17
Joined: Tue Mar 17, 2015 5:29 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby indolentpotato » Mon May 25, 2015 10:49 am

What interface does it use?

User avatar
Marksman311
Posts: 53
Joined: Sat Feb 21, 2015 5:26 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby Marksman311 » Mon May 25, 2015 6:16 pm

You just plug it in via a USB and connect the computer. It can be used to engrave many different types of materials, from wood, bamboo, Plexiglas, rubber, granite, marble, vinyl, leather, tiles and most material which are not very ductile.
Why procrastinate today? When you can do it tomorrow!

User avatar
_Twain_
Site Admin
Posts: 76
Joined: Sat Feb 21, 2015 5:40 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby _Twain_ » Sun Jun 07, 2015 5:35 pm

Thanks Marksman, you have pretty much described it.

User avatar
Breathe
Posts: 31
Joined: Tue Apr 21, 2015 3:51 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby Breathe » Sun Jun 28, 2015 3:01 pm

Please come again _Twain_. What did you say was the model name of the cutter :?:

User avatar
shaPeoko
Posts: 30
Joined: Sat Feb 21, 2015 6:02 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby shaPeoko » Sun Jul 12, 2015 6:43 pm

I think that something which weighs as less as 38 kg would be a great mobile router in my books. Are the capabilities sufficient to boot?

User avatar
maulana
Posts: 47
Joined: Mon May 18, 2015 3:50 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby maulana » Mon Sep 28, 2015 6:13 am

Even the #Badog software has good rep out there!
All men dream-but not equally. Those who dream by night in the dusty recesses of their minds wake in the day to find that it was vanity: but the dreamers of the day are dangerous men, for they may act their dream with open eyes, to make it possible.

User avatar
maulana
Posts: 47
Joined: Mon May 18, 2015 3:50 pm

Re: Machine Introductory Series: the Badog Laser CNC Cutter Engraver

Postby maulana » Tue Oct 06, 2015 4:35 am

Check out the these views about #badog CNC
All men dream-but not equally. Those who dream by night in the dusty recesses of their minds wake in the day to find that it was vanity: but the dreamers of the day are dangerous men, for they may act their dream with open eyes, to make it possible.


Return to “Small hobby routers and CNC mills”

Who is online

Users browsing this forum: No registered users and 1 guest



  •  The team

  •  Search
  • Advanced search


  •  Top Posters

  •  Newest members

  •  Who is online?
  • In total there is 1 user online :: 0 registered, 0 hidden and 1 guest

    Users browsing this forum: No registered users and 1 guest



 

 

cron