Collet closer won't open

Small hobby routers and mills like the Badog, Artisan, CNC-shop, isel, k2, charly robot advice and experiences
Sdmwix
Posts: 8
Joined: Tue Oct 20, 2015 2:48 am
Location: tortola

Collet closer won't open

Postby Sdmwix » Sat Oct 24, 2015 1:37 am

DAM!
I run a chucking job. The Collet normally has a stop facing the ends of the bars to length. Last week i accidentally pressed the release button for the collets and the spindle is now slowing down at the cycle endle and now the collet closer will not open the collet. Would someone please advice me on this.

Sanders
Posts: 8
Joined: Fri Jun 05, 2015 8:47 pm

Re: Collet closer won't open

Postby Sanders » Mon Oct 26, 2015 5:10 pm

Which collet are you using? is it an ER collet?

User avatar
Abni
Posts: 9
Joined: Sun Aug 09, 2015 7:20 am
Location: Lower Princes

Re: Collet closer won't open

Postby Abni » Mon Oct 26, 2015 5:19 pm

Something wrong must have happened with the connections, for example the connector might have fell of the button. just remove the panel and check the connections..

Sdmwix
Posts: 8
Joined: Tue Oct 20, 2015 2:48 am
Location: tortola

Re: Collet closer won't open

Postby Sdmwix » Mon Oct 26, 2015 5:23 pm

That was the first thing that i did Abni and all connections were intact.

Vinsnow
Posts: 8
Joined: Sun Aug 09, 2015 9:01 pm
Location: Mawson

Re: Collet closer won't open

Postby Vinsnow » Mon Oct 26, 2015 5:34 pm

What about the door switch? have you checked it? i suppose that is where the problem is..


Return to “Small hobby routers and CNC mills”

Who is online

Users browsing this forum: No registered users and 1 guest



  •  The team

  •  Search
  • Advanced search


  •  Top Posters

  •  Newest members

  •  Who is online?
  • In total there is 1 user online :: 0 registered, 0 hidden and 1 guest

    Users browsing this forum: No registered users and 1 guest