Need some help with planning, execution, experiences or want to tell a witty anecdote or give some small business advice to our noobies for their ideas?
Hi guys, I have been operating CNC machines for a long. I have come to learn about some things that one needs to do before you start operating a CNC...
Last post
Thanks guys,
This will really be helpful. Sometimes we know things but we tend to forget easily or ignore. Reminding us is always good.
I have a 21-T control. Whenever the turret tries indexing it rotates for a while and then tries to seat. It is supposed to rotate 30 degrees per tool...
Last post
Programming could be the solution here but that doesn't mean it has to be the only one. Try replacing the shaft and see how that goes. I suspect that...
Attachment(s) by 5so95n » Thu Jul 30, 2015 9:22 pm
First post
Are you starting up as a new enterprise that provides a variety of CNC milling services? Then you will need to make yourself unique from your...
Last post
Keeping you mind open when dealing with the newest technology in the CNC machinery field is required of you and your employees. Modern technology may...
Hi guys, I would like to by some kind of a machine; A CNC routing machine, but before i settle on this, i would like to know some of the factors that...
Last post
You are welcome Sanvan. Log on to AmateurCNC facebook page for more information on the same.
Hi all,
I recently bought a Hitachi VK45II (vintage 1995). I now have a program manual for it though i lack other manuals. I have now been needing to...
Last post
I wonder how much he got it for. Such vintage machines don't go cheaply these days.
Can i or anyone be able to repair stepper motor drivers? My X and Y axis don't work even when when i power up the machine.
The two non-working...
Last post
The motors do lock up whenever the power is on. I know this now after checking the BoB as well as all the inputs and outputs with a multimeter.
When...
I have just replaced the 24 volt power supply board as a result of the disalarm light having been turned on with the monitor not working. The monitor...
Last post
Perhaps you didn't do the replacement in the right manner.check it again and if you are not confident that you can do it look for help from somebody...
I may need a field programmer for arduino pro-mini! Has anybody here got some experience with this the ispnub device? I'll attach a pix (internet) of...
Last post
Still looking for the Programmer? If yes, tell me so that i can hook you with one.
Greetings all,
The second hand CNC machine i recently acquired is now almost essentially complete, though it is not commissioned yet. Its motors are...
Last post
Thank you so much Bailando and Nightcoeur. I appreciate your help very much.
Hi all,
Am not conversant to the language of drivers stepper motors and drivers and therefore today i find myself faced with this particular issue. I...
Last post
Why don't you do some guesswork by trying different connections until the point you come across the one that works. I know putting a wrong connection...
The manual that came with my CNC talks of putting subroutines in separate file and there is a subroutine named folder in the directory. my questions...
Last post
Hi, please allow me to answer only one part of your question coz that all am certain of as for now. The answer is no.. You don't really have to keep...
Hi, i would like to ask whether its feasible for one to change to double line canned cycles from single line caned ones on a Fanuc 11T control for a...
Last post
But seriously, they still run on tapes? Time for some retrofits and attachments right there!
Users browsing this forum: No registered users and 1 guest
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum